Intel MFSYS25V2 Service Guide

Intel
®
Modular Server System Service Guide 137
To configure the SNMP Trap destination, enter the IP address and Community string for
each destination. By default, SNMP uses port 162. To specify a different port in the
destination IP setting, enter the IP address followed by a colon (:) followed by the port
number (for example, 10.7.155.62:162).
To verify the SNMP trap destination settings, click the Send a Test Trap button and verify
that the trap was received by the target system.
SNMP V3
SNMP v3 adds additional authentication and privacy features to SNMP v2. The
Authentication feature provides a means to verify users or agents and the privacy feature
provides a way to encrypt the data to prevent unauthorized disclosure.
The SNMP v3 Access screen enables the IT administrator to configure an SNMP v3 user
account with these additional authentication and privacy features. However, to use SNMP
v3, you must also configure the SNMP v2 settings on the SNMP Options screen.
Note: You do not need to enable the SNMP v2 Support option in order to use the
SNMP v3 features.
Figure 87. SNMP V3
To configure an SNMP v3 user account on the SNMP v3 Access screen, you must first set
User Access to either read-only or read-write. With read-only access, an SNMP v3 user
account can view system settings remotely. With read-write access, an SNMP v3 user
account can view system settings remotely and change the Intel
®
Compute Module’s

Intel MFSYS25V2 Specifications

General

Brand	Intel
Model	MFSYS25V2
Category	Server
Language	English