Intel® Server Board S1200V3RP TPS BIOS Setup Interface
Revision 1.2
Comments: Information only. Displays the total physical memory installed in
the system, in MB or GB. The term physical memory indicates the total memory
discovered in the form of installed DDR3 DIMMs.
Back to [Main Screen] — [Screen Map]
8. Quiet Boot
Option Values: Enabled
Disabled
Help Text:
[Enabled] – Display the logo screen during POST.
[Disabled] – Display the diagnostic screen during POST.
Comments: This field controls whether the full diagnostic information is
displayed on the screen during POST. When Console Redirection is enabled, the Quiet
Boot setting is disregarded and the text mode Diagnostic Screen is displayed
unconditionally.
Back to [Main Screen] — [Screen Map]
9. POST Error Pause
Option Values: Enabled
Disabled
Help Text:
[Enabled] – Go to the Error Manager for critical POST errors.
[Disabled] – Attempt to boot and do not go to the Error Manager for critical POST errors.
Comments: If enabled, the POST Error Pause option takes the system to the
error manager to review the errors when major errors occur. Minor and fatal error
displays are not affected by this setting.
Back to [Main Screen] — [Screen Map]
10. System Date
Option Values: <System Date initially displays the current system calendar
date, including the day of the week>
Help Text:
System Date has configurable fields for the current Month, Day, and Year.
To Next Page
Loading...
Need help?
General
