Intel S1200V3RP - Page 162

BIOS Setup Interface Intel® Server Board S1200V3RP TPS
Revision 1.2
148
must be controlled via a system management interface, and the NMI Diagnostic Interrupt
is not available.
Note: This option is not visible on S1200V3RP Server Board.
Back to [Security Screen] — [Screen Map]
7. TPM State
Option Values: <Displays current TPM Device State>
May be:
Enabled & Activated
Enabled & Deactivated
Disabled & Activated
Disabled & Deactivated
Help Text: <None>
Comments: Information only. Shows the current TPM device state.
A Disabled TPM device does not execute commands that use the TPM functions and
TPM security operations are not available.
An Enabled & Deactivated TPM is in the same state as a disabled TPM, except that
setting of the TPM ownership is allowed if it is not present already.
An Enabled & Activated TPM executes all commands that use the TPM functions and
TPM security operations are also available.
Note: This option appears only on boards equipped with a TPM.
Back to [Security Screen] — [Screen Map]
8. TPM Administrative Control
Option Values: No Operation
Turn On
Turn Off
Clear Ownership
Help Text:
[No Operation] - No changes to current state.