Intel S1200V3RP Technical Product Specification

BIOS Setup Interface Intel® Server Board S1200V3RP TPS
Revision 1.2
168
Auto
Help Text:
Select BMC IPv6 source: If [Static], IPv6 parameters may be edited. If [Dynamic], these
fields are display-only and IPv6 address is acquired automatically (DHCP). If [Auto],
these fields are display-only and IPv6 address is acquired using ICMPv6 router /
neighbor discovery.
Comments: This specifies the IP Source for IPv6 addressing for the
Baseboard LAN configuration. There is a separate IPv6 Source field for the Intel
®
RMM4
LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is Enabled, the initial value for this field is acquired from the BMC,
and its setting determines whether the other Baseboard LAN IPv6 addressing fields are
display-only (when Dynamic or Auto) or can be edited (when Static).
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen
Map]
7. IPv6 Address
Option Values: [Entry Field 0000:0000:0000:0000:0000:0000:0000:0000,
0000:0000:0000:0000:0000:0000:0000:0000 is default]
Help Text:
View/Edit IPv6 address. Press <Enter> to edit. IPv6 addresses consist of 8 hexadecimal
4 digit numbers separated by colons.
Comments: This specifies the IPv6 Address for the Baseboard LAN. There is a
separate IPv6 Address field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC.
The setting of IPv6 Source determines whether this field is display-only (when Dynamic
or Auto) or can be edited (when Static).
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen
Map]
8. Gateway IPv6
Option Values: [Entry Field 0000:0000:0000:0000:0000:0000:0000:0000,
0000:0000:0000:0000:0000:0000:0000:0000 is default]
Help Text:

Intel S1200V3RP Specifications

General

Brand	Intel
Model	S1200V3RP
Category	Server Board
Language	English