Intel SE7501HG2 - Table 9. Primary;Secondary, Master;Slave Submenu; Table 10. Processor Settings Submenu

Intel Server Board SE7501HG2 Product Guide
66
Table 9. Primary/Secondary, Master/Slave Submenu
Feature Choices Description
Type None
Auto
Auto instructs the system to automatically detect the
drive type.
None instructs the system to ignore this drive.
LBA Mode Control
Disabled
Enabled
This field is informational only. It is disabled if no
devices are detected.
Multi-Sector Transfer
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
This field is informational only and can be seen only if
an IDE hard disk drive is detected.
This field specifies the number of sectors that are
transferred per block during multiple sector transfers.
PIO Mode Standard
1
2
3
3 / DMA 1
4
4 / DMA 2
This field is informational only.
It displays the method of moving data to and from the
hard drive.
Ultra DMA Mode Mode 2
Mode 4
This field is informational only.
It displays the method of moving data to and from the
hard drive.
Table 10. Processor Settings Submenu
Feature Choices Description
Processor POST Speed Information Only Displays the measured processor speed.
Processor Retest Enabled
Disabled
When enabled, the BIOS will clear the processor status
history and retest all processors at the next boot. This
option automatically reverts to Disabled upon booting.
Hyper-Threading Support
Enabled
Disabled
When disabled, hyper-threading is disabled.
Processor 1 CPUID Information Only Reports the CPU ID for processor 1.
Processor 1 L2 Cache
Size
Information Only Reports the L2 cache size for processor 1.
Processor 2 CPUID Information Only Reports the CPU ID for processor 2.
Processor 2 L2 Cache
Size
Information Only Reports the L2 cache size for processor 2.