Intel SE7501HG2 - Exit Menu; Table 26. Removable Devices Submenu; Table 27. ATAPI CD-ROM Devices Submenu; Table 28. Exit Menu

Intel Server Board SE7501HG2 Product Guide
76
Table 26. Removable Devices Submenu
Feature Choices Description
Device list:
Bootable, removable
devices
Select device Use the up and down arrow keys, then select the device with
the Enter key
Table 27. ATAPI CD-ROM Devices Submenu
Feature Choices Description
Device list:
ATAPI CD-ROM drives
Select device Use the up and down arrow keys, then select the device with
the Enter key
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys, then press <Enter> to execute the option. Pressing <Esc> does not exit this menu. You
must select one of the items from the menu or from the menu bar to exit.
Table 28. Exit Menu
Choices Description
Exit Saving Changes Exit after writing all modified Setup item values to CMOS.
Exit Discarding Changes Exit leaving CMOS unmodified. User is prompted if any of the setup fields
were modified.
Load Setup Defaults Load default values for all SETUP items.
Load Custom Defaults Load values from previously saved custom defaults. This option is not
available if no custom defaults are detected.
Save Custom Defaults Stores custom defaults in NVRAM.
Discard Changes Read previous values from NVRAM.