Intel SE7501HG2 - 1 Description; Server Board Features; Table 1. Server Board Features

Intel Server Board SE7501HG2 Product Guide
8
1 Description
Server Board Features
The Intel
®
server board SE7501HG2 offers a “flat” design, with the processors and memory
subsystems residing on the board. The server board supports dual-processor operation with
Intel
®
Xeon™ processors in the Flipchip-micro Pin Grid Array2 (FC-mPGA2) package and the
Intel
®
E7501 chipset. The board contains embedded devices for video, network, IDE, and provides
basic monitoring hardware and interrupt control for dual-processors and PC/AT compatible
operation.
Table 1. Server Board Features
Feature Description
Processor Dual 400 or 533 FSB Intel Xeon processors with 512KB L2 Cache
Chipset Intel E7501 chipset:
• Supports 533 MHz Front Side Bus (FSB)
• MCH memory controller (North Bridge)
• ICH3-S I/O controller (South Bridge)
• P64H2 64-bit I/O hub
Memory • DDR266 compliant ECC DIMMs providing up to 12 GB of memory
1
• DIMM Sockets: Six 72-bit, 184-pin, gold contact
• Supported DIMM sizes: 128 MB, 256 MB, 512 MB, 1 GB, and 2 GB
Video • Integrated onboard ATI Rage
*
XL 64-bit SVGA video controller
• 8 MB SDRAM video memory
• SVGA video port
PCI bus Six PCI expansion slots for add-in full- or half-length boards:
• One 64-bit, PCI-X 133 MHz expansion slot
• Two 64-bit, PCI-X 100 MHz expansion slots
• Three 32-bit, 33 MHz, PCI expansion slots
Network Intel
®
Dual Port Gigabit Ethernet Controller (Intel
®
82546EB), providing two RJ-45
connections
Integrated SCSI Adaptec
*
AIC-7902 dual-channel U320 SCSI controller
Continued
1
DDR200 compliant ECC DIMMs can be used only if 400 MHz processors are installed.