Intel SE7501HG2 User Manual

Intel Server Board SE7501HG2 Product Guide
70
Table 16. Advanced Chipset Control Submenu
Feature
Choices or
Display Only Description
Wake On Ring Enabled
Disabled
Controls legacy wake-up source
Wake On LAN Enabled
Disabled
Controls legacy wake-up source
Wake On PME Enabled
Disabled
Controls legacy wake-up source
Wake On RTC Alarm Enabled
Disabled
Controls legacy wake-up source
Security Menu
You can make the following selections from the Security Menu. Enabling the Administrator
Password field requires a password for entering Setup. Passwords are not case-sensitive.
Table 17. Security Menu
Feature Choices Description
User Password is
Not Installed
Installed
Information only; once the password is set, it can be disabled by
selecting the Set Administrative Password and then setting the
password to a null string, or by using the clear password jumper on the
board.
NOTE: The clear password jumper clears both the Administrator and
User passwords.
Administrator
Password is
Not Installed
Installed
Information only; once the password is set, it can be disabled by
selecting the Set Administrative Password and then setting the
password to a null string, or by using the clear password jumper on the
board.
NOTE: The clear password jumper clears both the Administrator and
User passwords.
Set Administrative
Password
<Enter> When the <Enter> key is pressed, you are prompted for a password;
press the ESC key to abort.
Once set, the password can be disabled by setting the password to a
null string, or by using the clear password jumper.
NOTE: If the clear password jumper is used, both the User and
Administrative passwords will be cleared.
Entering Setup with the Administrative Password provides full access to
all BIOS Setup utility menus.
Set User Password <Enter> This option is available only if an Administrator Password is configured.
When the <Enter> key is pressed, you are prompted for a password;
press the ESC key to abort.
Once set, the password can be disabled by setting the password to a
null string, or by using the clear password jumper.
NOTE: If the clear password jumper is used, both the User and
Administrative passwords will be cleared.
Password on Boot
Enabled
Disabled
Requires password entry before boot. System will remain in secure
mode until password is entered. This option is only available if a User
Password is configured.
Fixed Disk Boot
Sector
None
Write Protect
When Write Protect is enabled, the boot sector of the hard drive is
protected. This prevents viruses from corrupting the drive.
continued

Intel SE7501HG2 Specifications

General

Brand	Intel
Model	SE7501HG2
Category	Server Board
Language	English