Intellian C700 User Manual

59
Using AptusLX
No. Item Description
1
Network Sets the information about a network and ports.
2
Network Cong
Sets the network conguration.
• DHCP: Sets the DHCP function by toggling the activation button (Activate/
Inactivate).
• Start IP: Sets the start range of lease IP address.
• End IP: Sets the end range of lease IP address.
• Subnet Mask: Sets the subnet mask (Factory default: 255.255.255.0).
• Gateway: Sets the gateway IP address.
• Lease Time: Sets the lease time (sec).
Click the Apply button to apply the settings to the system.
3
Port
Sets each switch port.
• Name: Displays the port mane (port 1, 2, 3, and 4).
• PoE Status: Sets the PoE function by toggling the activation button on port 1
and 2.
• Port Type: The port 1 is xed for LAN. The port 4 can be selected as LAN,
SDF, or WAN from the drop-down list. Port 2 and 3 can be selected as LAN
or SDF from the drop-down list.
• Link Status: Displays the link status (Up/Down).
Click the Apply button to apply the settings to the system.
3
1
2
8.7 Settings
This menu sets and displays the Network, Wi-Fi, Firewall, Phone/PBX, Data, SDF, and External GPIO function.
8.7.1 Network

Intellian C700 Specifications

General

Manufacturer	Intellian
Stabilization	3-axis
Wind Survival	50 m/s
Wind Operational	30 m/s
Compatibility	Inmarsat C
Mounting	Pole
Diameter	85 cm / 33.5 in