Interlogix Advisor Advanced ATS2000A-MM User Manual

Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 105
Note: This menu is only available for a wireless expander ATS1235 with
firmware version 1.13 or newer, which is online.
4.1.n.7.1 Sensor ID
1>Sensor ID
10EBA9E
The screen allows you to view the sensor ID.
Note: First two digits of the sensor identifier also define the sensor type. See
Table 27 below.
4.1.n.7.2 Sensor type
2>Sensor type
DWS
The screen allows you to view the sensor type. The following sensor types are
available:
Table 27: Wireless sensor types
Type
Description
ID
Repeater
Wireless signal repeater
0A*
CO
Carbon monoxide sensor
0D*
DWS
Door/Window sensor
10*
Smoke sensor
Smoke sensor
11*
PIR
Passive infrared detector
12*
2 button panic
2 button panic sensor
14*
Shock sensor
Shock sensor
18*
Sound sensor
Glass break sound sensor
1A*
PIR camera sensor
Wireless PIR camera
23*
4.1.n.7.3 Supervision
3 Supervision
>Off<
Enables or disables the wireless device supervision. Supervision of all types
becomes active. See “2.2.2.n.4.4 Supervision” on page 77 for more details.
4.1.n.7.4 Sensor opt
4 Sensor opt
>Ignore alarm<
Sensor options depend on the type of the wireless device.
See an appropriate RF device manual for more information on available options.
The following options may be available.

Interlogix Advisor Advanced ATS2000A-MM Specifications

General

Brand	Interlogix
Model	Advisor Advanced ATS2000A-MM
Category	Control Panel
Language	English