Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 155
8.7.3 Authorization
3 Authorization
>Card&PIN<
The Authorization menu allows you to change the panel authorization method.
8.7.4 Duress method
4 Duress method
>Disabled<
The Duress method menu allows you to change the duress entering method.
See Advisor Advanced User Guide for more information on available duress
methods.
8.7.5 PIN length
The PIN length menu allows you to change the PIN length. See “3.1.n.2.1
Change PIN” on page 84 for more information about PINs.
Caution: If PIN length is changed when remote PIN is set, the configuration
software will not be able to connect the panel with the programmed data
anymore. See “3.1.n.2.2 Remote PIN” on page 85 for details.
8.7.6 PIN chg mode
The PIN change mode option allows you to choose the appropriate PIN change
mode. See “3.1.n.2.1 Change PIN” on page 84 for more details.
8.7.7 Alarm confirm
The Alarm confirm menu allows you to set a various options connected to the
alarm verification.
8.7.7.1 AB mode
The AB mode option enables the AB alarm confirmation feature for particular
areas. When set to On, the first alarm is reported as a standard burglar alarm (A-
alarm). A second input has to alarm within a certain period to report a confirmed
alarm (B-alarm), provided the first alarm in the area did not occur in an entry/exit
zone.
The verification mode is programmable per area.
To Next Page
Loading...
