Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 181
9.3.n.5.3 Credit
The Credit menu lets you configure and perform GSM account checking.
9.3.n.5.3.1 Check now
The Check now menu lets you manually check your GSM account. When
received, the account state is displayed on the LCD.
Prior to this, the credit checking must be configured in the menus described
below.
9.3.n.5.3.2 Check mode
Depending on the GSM network, credit can be checked in a different way. The
following modes are available:
• Standard: The credit is checked when contacting the GSM provider using the
request code. This mode is used in most GSM networks.
• SMS message: The credit is checked by sending a predefined SMS message
on the number given in the “9.3.n.5.3.3 Check number” below.
9.3.n.5.3.3 Check number
3 Check number
>+48600000000<
The Check number is the phone number that is used for sending credit check
SMS messages, if this check mode is chosen in “9.3.n.5.3.2 Check mode” above.
9.3.n.5.3.4 Request code
The Request code for the account check must be configured in this menu. It
allows you to enter numbers as well as “*” and “#” signs (for example, *101#).
Contact your GSM provider to find out how to check your account.
9.3.n.5.3.5 Check period
The Check period (in days) defines how often the system automatically checks
your account.
To Next Page
Loading...
