220 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
Failed to deliver an alarm
message
MI Bus communication fault
NTP server
connection fault
NTP server connection fault
Ethernet connection fault
Ethernet IP is not configured
GPRS IP is not configured
Valid Card or PIN presented by
the selected user. Active for 3 s
after event. Can be used to
control door lock for specific
users.
SMS control is disabled by
invalid attempts
SMS reporting will be activated
after set
Specified output activates
Physical output activates
The selected filter condition is
true / valid.
Valid Card or PIN presented by
a user from the selected user
group. Active for 3 s after event.
Can be used to control sirens for
specific user groups.
All areas in the system are set
Auto answer procedure started
(1 min)
Remote connection fail (1 min)