Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual 51
Chapter 7—Commands
D – Density, cont.
Thermal Transfer Printing
Label/Tag Type Ribbon Type Rec. Density
at Speed S = 2
Max. Speed
Duratran II Standard D4 S3
Duratran II Tag Standard D4 S2
Duratran II Premium D5 S3
Duratran II Tag Premium D6 S2
Kimdura Premium D6 S3
Matte Polyester Premium D6 S3
Gloss Polyester Super Premium D7 S3
TTR Uncoated GP02 D1 S2
TTR Matte Coated HP05 D6 S3
TTR Premium HP05 D4 S3
TTR Premium Board HP05 D7 S1
TTR Polyethylene HP05 D2 S3
TTR Gloss Polyethylene HP05 D5 S3
TTR High Gloss White Premium HP05 D7 S3
TTR Matte Coated HP07 D7 S3
TTR Premium HP07 D5 S3
TTR Premium Board HP07 D8 S1
TTR Polyethylene HP07 D4 S3
TTR Gloss Polyethylene HP07 D8 S3
TTR High Gloss White Premium HP07 D9 S3
TTR High Gloss Polyester HR03 D7 S3
To Next Page
Loading...
Need help?
General