Intermec EasyCoder C4 - Ribbon Load

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 31
Chapter 7 Commands
Remarks, cont.
Set the Form Step Value p
4
to +3 for the counter Cn used in our example (see the
C-command line). Also refer to “C Command – Counter”.
↵
FK"TEST3" ↵
FS"TEST3" ↵
C0,6,L,+3,"Counter 0" ↵
B120,50,0,2,3,6,100,B,C0 ↵
B320,50,0,2,3,6,100,B,C0+1 ↵
B520,50,0,2,3,6,100,B,C0+2 ↵
FE ↵
B – Standard Bar Codes, cont.