Intermec PB22 User Manual

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
2 PB22 and PB32 Mobile Label and Receipt Printer User Guide
Introducing the PB22 and PB32 Mobile Label and
Receipt Printer
The PB22 and PB32 is a rugged mobile label and receipt printer that is
designed for use with Intermec mobile computers, Intermec vehicle
mount computers, and the SF51 and SR61 scanners. The PB22 uses
50.8 mm (2 in) media and the PB32 uses 76.2 mm (3 in) media.
The PB22 and PB32 provides:
• a print resolution of 203 dpi.
• print speeds of up to 101.6 mm per second (4 ips).
• 802.11 b/g or Bluetooth radio options.
What’s New
This version of the user guide includes these changes:
• Updated the procedure to set up Bluetooth communications. See
“Setting Up Bluetooth Communications” on page 33.
• Updated the media specifications. See “Specifications” on
page 68.
• Added the cleaning pen to the list of accessories. See
“Accessories” on page 74.
Note: Unless otherwise noted, this manual uses the term “printer” to
refer to both the PB22 and PB32 printers.

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g