Intermec PB22 User Manual

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
PB22 and PB32 Mobile Label and Receipt Printer User Guide 21
Understanding Pause Mode
Use Pause mode to momentarily stop printing or to cancel a current
print job. When you pause the printer, the Pause mode screen appears.
Use the Feed button to both pause and resume printing.
The PB22 and PB32 in Pause Mode
To enter Pause mode
• Press the Feed button while the printer is printing.
To resume printing
• Press the Feed button.
To cancel a print job
1 Press the Feed button to pause printing (Fingerprint, IPL, or
ESC/P).
2 Press the Information button (or soft key) to cancel the print
job (Fingerprint or IPL) or press and hold the Pause button in
ESC/P.
Understanding Setup Mode
Use Setup mode to change the settings on the printer.
Sample Setup Mode Screen
CANCEL
PAUSE
PAUSE
OK
SETUP:
SER-COM

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g