Intermec PB22 User Manual

Appendix C — IPL and Fingerprint Setup Menus
84 PB22 and PB32 Mobile Label and Receipt Printer User Guide
IPL Setup Menu
Setup
SER-COM
NETWORK
TEST/SERVICE
MEDIA CONFIGURATION
POWER
IP SELECTION
IP ADDRESS
NETMASK
BAUDRATE
DATA BITS
TESTPRINT
DATA DUMP
MEDIA TYPE
PAPER TYPE
DISPLAY
LBL LENGTH
DOTS
ORIENTATION
CONTRAST
PARITY
STOPBITS
DEFAULT
ROUTER
NAME SERVER
MAC ADDRESS
SENSITIVITY
TESTFEED MODE
DARKNESS
PWRUP
EMULATION
PRINT SPEED
LTS CALIBRATION
PROTOCOL
LBL REST POINT
FORM ADJ DOTS
X
FORM ADJ DOTS
Y
CONFIG
TEST LABELS
MEMORY RESET
FORMAT
PAGE
UDC
FONT
LSS TEST
LOW BATTERY
SLEEP TIMER
STANDBY TIMER
ADVANCED
THERMAL MGMT
MIN SPEED

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g