Intermec PB22 User Manual

Chapter 2 — Configuring the PB22 and PB32
46 PB22 and PB32 Mobile Label and Receipt Printer User Guide
Upgrading the Firmware
The latest firmware and software is available for download from the
Intermec website at www.intermec.com. You can upgrade the
firmware on your printer using:
• PrintSet. You can download PrintSet from the downloads page for
the printer on the Intermec website at www.intermec.com.
• the printer home page.
• SmartSystems.
• a serial cable and a communications program, like HyperTerminal.
Upgrading the Printer Firmware Using PrintSet
You can only upgrade your printer using PrintSet when the printer is
running IPL, Fingerprint, or ESC/P printer languages. To upgrade the
printer using PrintSet, you need to install PrintSet to your PC and
purchase a serial cable (P/N 075497).
To upgrade the printer firmware using PrintSet
1 If your printer is running ZSim or DSim, change the printer
language to IPL, Fingerprint, or ESC/P. For help, see “Changing
the Printer Language” on page 7.
2 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 31.
3 Download the firmware upgrade file (.bin) to your PC:
a Go to www.intermec.com.
b Click Support > Downloads.
c Use the Product Category, Product Family, and Product
fields, to select the printer model.
d Click Submit. The available software appears.
e Download the latest firmware version to your PC.
f Extract the .zip file to a folder on your PC.
When upgrading your firmware, make sure the battery in the
printer is fully charged. If the printer loses power during the
upgrade, the printer may be permanently damaged.

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g