Intermec PB22 User Manual

Chapter 3 — Troubleshooting and Maintaining the PB22 and PB32
PB22 and PB32 Mobile Label and Receipt Printer User Guide 65
Cleaning the Printer Media Compartment
1 Open the media cover.
2 Remove the media and ribbon.
3 Use a brush or air blow the compartment.
Make sure the paper sensors are free of dust.

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g