Intermec PB22 User Manual

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer
6 PB22 and PB32 Mobile Label and Receipt Printer User Guide
There is only one LED on the printer: the Ready-to-Work™ indicator.
Understanding the Printer Language
Your printer comes with Intermec Printer Language (IPL),
Fingerprint, ESC/P, ZSim, and the ability to run any of the printer
languages. The language you select affects the functionality of the
printer and how you interact with it.
The printer displays the current firmware type and version in Ready
mode.
Printer Running IPL Firmware
The first time you turn on the printer, you select the printer language
to run on the printer. The language you select automatically runs each
time you turn on your printer.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off One of several conditions:
• The printer is in Standby mode.
• The printer is in Info mode.
• The printer is in Setup mode.
On The printer is turned on and operating.
Blinking One of several conditions:
• The printer is out of paper.
• The media cover is open.
• There is a printer error that requires you to perform an
action. For a list of possible problems, see
“Troubleshooting the Printer” on page 56.
IPL 12.0.0

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g