Intermec PB22 User Manual

Chapter 2 — Configuring the PB22 and PB32
PB22 and PB32 Mobile Label and Receipt Printer User Guide 45
4 If you are using Fingerprint or IPL:
a Press the Setup button.
b Press the until you reach Network.
c Press to enter the Network system menu.
d Press until you reach IP address.
e Press to view the IP address.
5 Start a web browser.
6 In the address field, type the IP address of your printer and press
Enter. The home page of the printer appears.
7 Click Login and enter your administrator name and password.
8 On the home page of the printer, click Configuration.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see one of these documents:
• Intermec Fingerprint Command Reference Manual
• Intermec Printer Language (IPL) Command Reference Manual
• ESC/P Programmer’s Reference Manual
• SmartSystems Online Help.
You can download these documents from the Intermec website at
www.intermec.com.
Changing Configuration Settings Using SmartSystems
You can use the SmartSystems console to change configuration
settings on your printer. The printer ships with the SmartSystems
client loaded on it. The console is part of SmartSystems and is
available from the Intermec website. To download SmartSystems, go
to www.intermec.com/products/smrtsysfoundation/index.aspx.

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g