Intermec PB22 User Manual

Appendix B— Default Settings
PB22 and PB32 Mobile Label and Receipt Printer User Guide 79
Factory Default Settings (IPL Printers)
Bluetooth
Discoverable Enable
Connectable Enable
Encryption Disable
Authentication Disable
Reserve printer Disable
Device name 1-16 characters
Passcode 1234
Factory Default Settings for Fingerprint Printers (continued)
Setting Default Value
Factory Default Settings for IPL Printers
Setting Default Value
Auto detect printer Enable
Display
Orientation Normal
Contrast Medium
Print engine emulation mode None
Media
Form adjust dots X 0
Form adjust dots Y 0
Test feed mode Fast
Media type Continuous
Darkness 0
Sensitivity 180
Print speed 3 ips
Power
Low battery indicator 7.4 V
Sleep timer 20 sec
Standby timer 30 min

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g