Intermec PB22 User Manual

Appendix B — Default Settings
78 PB22 and PB32 Mobile Label and Receipt Printer User Guide
Factory Default Settings (Fingerprint Printers)
Factory Default Settings for Fingerprint Printers
Setting Default Value
Xstart 0
Display
Orientation Normal
Contrast Medium
Media
Width Printhead width
Length 1200
Test feed mode Fast
Type Variable length strip
Contrast 0%
Xstart 0
Label constant 80
Label factor 40
Print definitions
Clip default Off
Print speed 75 mm/s
Feed adjust
Start adjust 0
Stop adjust 0
Power
Low battery indicator 7.4 V
Sleep timer 20 sec
Standby timer 30 min

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g