Intermec PB22 User Manual

Appendix A — Specifications
74 PB22 and PB32 Mobile Label and Receipt Printer User Guide
Accessories
You can use these accessories with the printer. To order accessories,
contact your local Intermec sales representative.
AB27 Battery
Use the 7.4 V 2300 mAh lithium-ion battery to provide power to the
printer.
Power Supply (Model AE19)
Provides power to the printer and the 4-bay battery charger (Model
AC18).
AC18 4-Bay Battery Charger
Use the AC18 to charge up to four batteries at a time. The battery
charger is designed to sense when a battery is fully charged and not
overcharge it, ensuring long and consistent battery life.
AV14 Vehicle Dock
Use the vehicle dock to attach the printer to a truck.
Cart Mount
Stands the printer vertically when placed on a flat surface. Excellent
for cart or desktop use.
Belt Clip
Use the printer belt clip to attach the printer to your belt.
Handstrap
Use the printer handstrap to conveniently carry your printer. With the
handstrap attached, you can also attach the shoulder strap.
Media
You can use tag, label, or receipt media with the printer. Printer media
does not ship in the box with the printer but may be purchased from
www.intermec.com.
Media Core
Use the media core to hold the media in place. The 0.75 inch media
core ships with the printer. You can also order the 0.4 inch media core
separately.

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g