Intermec PB22 User Manual

PB22 and PB32 Mobile Label and Receipt Printer User Guide iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number
Date Description of Change
005 4/2013 Updated the procedure to set up Bluetooth
communications. Added information about the
AC18 charger to the troubleshooting table.
Updated media specifications in Appendix A.
Added the cleaning pen to the list of accessories.
004 5/2011 Revised battery information.
Added procedures for configuring wireless
network with PrintSet.
003 2/2011 Revised to include correct information on how to
load media, and how to load media for
self-strip printing.
002 12/2010 Revised to add information for upgrading the
firmware.

Intermec PB22 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Display	LCD
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Battery type	Built-in battery
Battery voltage	7.2 V
Bundled software	IPL, Fingerprint, ZSim (ZPLII Simulation), ESC-P, DSim
Media types supported	Labels
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	176 mm
Width	101 mm
Height	71 mm
Weight	678 g