Need help?Do you have a question about the INVT IPE300 Series and is the answer not in the manual?
General| Cooling Method | Forced air cooling |
|---|---|
| Protection Level | IP20 |
| Storage Temperature | -20°C to +60°C |
| Control Mode | V/F control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, overheat, short circuit, phase loss |
| Communication Interface | Modbus-RTU |
| Operating Temperature | -10°C to +40°C |
| Humidity | 5% to 95% (non-condensing) |
| Altitude | Below 1000m (Derating may be required above 1000m) |
| Input Voltage | 3-phase 380V (-15%)~440V (+10%), 50/60Hz |
To Next Page