IPE300 series engineering VFD Product overview
-14-
The rated output current is the output current when the output voltage is 380V.
Within the allowable input voltage range, the output current/power cannot exceed the rated
output current/power.
Table 3-2 AC 3PH 520V (-15%)–690V (+10%)
Full load
power
dissipa
-tion (W)
Note:
The input current of the 22–355kW VFD models is measured in cases where the input voltage is
660V without DC reactors and input/output reactors.
The input current of the 400–630kW VFD models is measured in cases where the input voltage is
660V and there are input reactors.
The rated output current is the output current when the output voltage is 660V.
Within the allowable input voltage range, the output current/power cannot exceed the rated
output current/power.