IPE300 series engineering VFD Optional peripheral accessories
-359-
Note:
1. The rated input voltage drop of input reactors is 2%±15%.
2. The current adjustment coefficient on the input side of the VFD is higher than 90% after a DC
reactor is configured.
3. The rated output voltage drop of output reactors is 1%±15%.
4. The preceding table describes external accessories. You need to specify the ones you choose
when purchasing accessories.
Table D-6 Reactors for AC 3PH 520V (-15%)–690V (+10%)
To Next Page
Loading...
Need help?
General