IPETRONIK IPEmotion PlugIn IPETRONIK-X - 5.1.3 PTP driver

IPEmotion
IPETRONIK PlugIn X V02.14.00
IPETRONIK GmbH & Co. KG
49/ 87
In order to operate the PlugIn IPETRONIK-X and IPETRONIK-CAN in parallel, you have to
disable the use of the CAN modules (through the CAN interface) for the PlugIn IPETRONIK-X.
Basic settings for the software filters
(aliasing free sampling) and the CSV
import (standard, device creation).
Basic settings for the device pool.
Reduce the number of device types to
be used by assigning a priority: High,
Normal, Low, Not used.
CAN interface pre-settings