IPETRONIK IPEmotion PlugIn IPETRONIK-X User Manual

Firmware update
IPETRONIK PlugIn X V02.14.00
IPETRONIK GmbH & Co. KG
84/ 87
6.1 Resetting modules
The system plug X-LINK DEF (X-LINK Module DEFAULT plug) is used for
resetting X-devices to its default settings.
Resetting effects on
 configuration settings
 serialized device specific settings (e.g. shunt check, offset compensation)
 the IP address range (default range)
How to use
 Switch off the power supply
 Plug in X-LINK DEF at the respective system connector of the device
 Switlch on the power supply
 Wait 10 seconds
 Switch off the power supply
 Pull off X-LINK DEF

IPETRONIK IPEmotion PlugIn IPETRONIK-X Specifications

General

Brand	IPETRONIK
Model	IPEmotion PlugIn IPETRONIK-X
Category	Measuring Instruments
Language	English