5.1.5 Using several DAQ systems and interfaces
The PlugIn IPETRONIK-X supports a simultaneous data acquisition using different Ethernet and/or CAN
interfaces. The PlugIn will identify all interfaces (and connected devices), if they are available and if they
have been installed correctly.
Alternatively you may create virtual systems (no real hardware connected) by the software.
Refer to Options > PlugIns > IPETRONIK-X for interface settings on LAN and CAN bus.
X-1
X-LINK and CAN modules via Ethernet interface
X-2
CAN modules (M2-Series) via 1st CAN interface
X-3
CAN modules (M-Series) via 2nd CAN interface
To Next Page
Loading...