IPETRONIK IPEmotion PlugIn IPETRONIK-X User Manual

Important and general information
IPETRONIK PlugIn X V02.14.00
IPETRONIK GmbH & Co. KG
6/ 87
IPEmotion
Descriptions in this documentation refer to releases with the version numbers from IPEmotion 2015 R1
(V05.00.00) to IPEmotion 2017 R3.1 (V07.02.01).
Firmware
Using the PlugIn IPETRONIK-X V02.00 and higher versions, modules require the following firmware:
 X-Modules: firmware version (≥ V02.00)
 CAN-Modules firmware version (≥ V04.00) Update using CAN download ≥ V02.03.03 and
latest M-FW-Update-Library
Refer to 5.1.1 System requirements Firmware PlugIn IPETRONIK-X V02.xx
Software components
that will be installed during PlugIn setup:
 Microsoft Visual C++ 2013 Redistributable
 CAN-Server V01.17.04
 IPETRONIK PTP driver V1.6.0.0
Network adapter
Make sure that the network adapter connected to the Mx/Sx devices is correctly configured
as DHCP client!
Depending on the interface settings, the use of several network adapters may cause network
communication errors. Please disable unused network adapters at your PC!
CAN interface
IPEcan requires a Firmware version > 2.8!
1.2.2 Legend of used icons
Tip
This icon indicates a useful tip that facilitates the application of the software.
Information
This icon indicates additional information for a better understanding.
Attention!
This icon indicates important information to avoid potential error messages.

IPETRONIK IPEmotion PlugIn IPETRONIK-X Specifications

General

Brand	IPETRONIK
Model	IPEmotion PlugIn IPETRONIK-X
Category	Measuring Instruments
Language	English