EasyManua.ls Logo

Iseki TM3265 - MAINTENANCE OF THE ELECTRICAL SYSTEM; To Maintain Electric Wiring; To Handle the Battery

Iseki TM3265
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY
15
MAINTENANCE OF THE ELECTRICAL SYSTEM
To Maintain Electric Wiring
(1) When servicing the electric wiring, stop the engine
without fail. Otherwise your hands or clothes may be
caught in or sandwiched between rotating parts.
(2) Before manipulating electric parts, be sure to
disconnect the earth battery cable (-), or you may
get an electric shock or be injured by sparks.
(3) Loose electric terminals or connectors may not only
lower electrical performance but also cause short
circuit or leakage of electricity, which may lead to
a fire. Promptly repair or replace damaged wiring.
(4) Remove chaff or dust from the battery, wiring,
muffler, or engine. Otherwise it could result a fire.
To Handle the Battery
(1) When working around the battery, avoid smoking.
The battery generates explosive hydrogen and
oxygen gases when it is being charged. Keep the
battery away from sparks or open flames.
(2) The battery should be inspected before starting the
engine. Be careful not to touch the electrolyte when
removing the vent plugs. If the battery electrolyte
makes contact with the skin or clothing, wash it off
immediately with water and then consult a doctor.
(3) When replacing or inspecting the battery, stop the
engine and turn the main switch off, or electrical
parts may be damaged or unexpected accident may
occur.
FIG. 24

Table of Contents