Iseki TM3265 - SPECIFICATIONS & CAPACITIES; Engine Oil; Engine Coolant; Fuel Tank

LUBRICATION & PERIODIC MAINTENANCE
63
SPECIFICATIONS & CAPACITIES
Engine Oil
Use engine oil of the appropriate SAE viscosity. Oil must meet or exceed; MIL-L-2104 C requirements, API Service “CD”.
TM3215 TM3245 TM3265
Capacity (liters).......................................................2.7 ................................... 2.7 ....................................3.1
Recommended Viscosity:
25 °C (78 °F) and Above ................... SAE 30W, 10W - 30 ......... SAE 30W, 10W - 30 .........SAE 30W, 10W- 30
0-25 °C (32-78 °F) ............................. SAE 20W, 10W - 30 ......... SAE 20W, 10W - 30 ........ SAE 30W, 10W - 30
Below 0 °C (32 °F) ............................ SAE 10W, 10W - 30 ......... SAE 10W, 10W - 30 ........ SAE 30W, 10W - 30
Recommended Change Intervals:
Initial Oil and Filter Change ........................ 50 hours ........................... 50 hours .......................... 50 hours
Oil Change, Thereafter ......................... Every 150 hours ............... Every 150 hours .............. Every 150 hours
Filter Change, Thereafter ..................... Every 300 hours ............... Every 300 hours .............. Every 300 hours
Engine Coolant
Freezing Protection (Original factory Fill) ......-34 °C (-30 °F) ................. -34 °C (-30 °F) ................ -34 °C (-30 °F)
Recommended Coolant ...........................
50 / 50 mixture ethylene ..... 50 / 50 mixture ethylene ...... 50 / 50 mixture ethylene
glycol and water ............... glycol and water .............. glycol and water
System Capacity (liters)..........................................4.5 ................................... 4.5 ....................................5.0
Fuel Tank
Capacity (liters)......................................................28.0 ................................. 28.0 ..................................28.0
Fuel recommended,
Above 4 °C (39 °F) ....................................... No.2 or No.2-D .................No.2 or No.2-D ................ No.2 or No.2-D
Fuel Recommended,
Below 4 °C (39 °F) ........................................ No.1 or No.1-D .................No.1 or No.1-D ................ No.1 or No.1-D
Transmission & Differential Housing (Including Hydraulic System)
Capacity (liters)......................................................18.0 ................................. 18.0 ............................... 18.0
Recommended Lubricant ............................Shell DONAX TD ............. Shell DONAX TD ............. Shell DONAX TD
or equivalent ................... or equivalent ....................or equivalent
Recommended Change Interval .................... First 50 hours ................... First 50 hours .................. First 50 hours
every 300 hours thereafter ....... every 300 hours thereafter ...... every 300 hours thereafter
Front Axle
Capacity (Common Reservoir) (liters) ....................4.0 ................................... 4.0 ....................................4.0
Recommended Change Lubricant .................. SAE 80 GL-4 ................... SAE 80 GL-4 ................... SAE 80 GL-4
Recommended Change Interval .................. Every 600 hours ..............Every 600 hours ............. Every 600 hours
Grease Fittings
Greasing Interval (All Fittings) ...................... Every 50 hours ................ Every 50 hours ............... Every 50 hours
Recommended Grease ............................
Lithium base grease No.2 ....... Lithium base grease No.2 ....... Lithium base grease No.2
NOTE: Change intervals stated above are for normal usage. Due to adverse operating conditions that may be experi-
enced (extremely dusty of muddy), change intervals may need to be more frequent.
LUBRICATION & PERIODIC MAINTENANCE