TM3215, 3245, 3265
16
(4) When disconnecting the battery cables, disconnect
the earth cable (-) first without fail. When connecting
the battery cables, connect the positive cable (+)
first. Disconnecting or connecting in wrong order
may lead to a short circuit or sparks.
To Handle Booster Cables
When using booster cables, pay attention to the
following items for safe operation:
(1) Before connecting cables, remove the vent plugs.
This will lower the force in case of explosion.
(2) Before connecting cables, be sure to stop the
engine. Otherwise unexpected accidents may occur.
(3) Use booster cables with sufficient electrical capacity.
A cable of inadequate capacity will cause generation
of heat, which may lead to a fire.
FIG. 25
FIG. 26
To Next Page
