Iseki TM3265 - INTRODUCTION

TM3215, 3245, 3265
22
The information in this publication describes the operation, maintenance and servicing of the TM3215, 3245, 3265
tractors. Every effort has been made to provide correct and concise information to you, the operator, as available at
date of book publication. Your dealer is available for further information about items in this operator’s manual or details
of your machine not be understood.
This operator’s manual is supplied with each machine to familiarize the operator with proper instructions needed for
operation and maintenance. Studying and adhering to these instructions will insure optimum machine performance and
longevity. A machine that is maintained properly and operated in the intended manner will provide greater dividends
than one that is neglected and / or operated in manner other than as intended. Design and servicing of this machine
has been kept as simple as possible to permit maintenance operations to be carried out with tools normally available.
This operator’s manual should be thoroughly read and understood prior to operation of this machine. Your dealer can
also assist in areas concerning machine operation and provide details concerning proper operation. It is suggested
that this operator’s manual be kept readily accessible, preferably with the machine, for future reference if questions or
concerns arise. If the original operator’s manual is damaged, consult your dealer in regards to acquiring a replacement.
The customer is strongly advised to use an official dealer in connection with any service problems and adjustments
that may occur. The dealer network is specially trained and equipped for all service work and to advise customer on
specific applications of the tractor in local conditions.
CAUTION: In some of the illustrations used in this operator’s manual, panels or guards may have been
removed for clarity. Never operate the tractor with these panels and guards removed. If the removal of a
shield is necessary to make a repair, it MUST be replaced before operation.
CAUTION: READ THIS OPERATOR’S MANUAL IN ITS ENTIRETY PRIOR TO OPERATING MACHINE.
Use only ISEKI parts for repairs and / or replacement.
INTRODUCTION