Iseki TM3265 - Height Adjustment; FIG. 63: KAB XH2; P2; FIG. 64: Seat (E6 Type)

TM3215, 3245, 3265
38
Height Adjustment, 2 -
The seat height is adjusted by turning height adjustment
knob.
There are 4 height positions;
(0) Upper height position
(I) Lowest height position
(II) Second height position
(III) Third height position
Fore-Aft Adjustment, 3
The seat is slid forward or backward by pulling fore-aft
adjustment lever.
FIG. 63: KAB XH2 / P2
Driver’s Weight Adjustment, 1 -
The seat’s suspension settings is adjusted for the driv-
er’s weight by turning driver’s weight adjustment control.
To increase the tension position, set the black handle
of driver’s weight adjustment control to (+) position, and
move it.
To decrease the tension position, set the black handle
of driver’s weight adjustment control to (+) position, and
move it.
Height Adjustment, 2 -
The seat height is adjusted by moving height adjustment
control.
To increase the height position of the seat, pull the
height adjustment control first, and move it to right side.
To decrease the height position of the seat, pull the
height adjustment control first, and move it to left side.
Fore-Aft Adjustment, 3
The seat is slid forward or backward by pulling fore-aft
adjustment lever.
FIG. 64: Seat (E6 Type)
Driver’s Weight Adjustment, 1 -
The seat height is adjusted by turning the weight adjust-
er knob. To increase the tension position, turn the weight
adjuster knob counterclockwise.
Fore-Aft Adjustment, 2 -
The seat is slid forward or backward by pulling fore-aft
adjustment lever.
3
2
1
FIG. 63
1
2
FIG. 64