Chapter 7 ADJUSTMENT MODE
7-26 UNI-3 Service Manual
C07-01-08 THE CHECKING OF HEATER'S BEING BROKEN
The dot display
The segment display
Sub cursor: Toggle back and forth between •0• and •1• by pressing the •’ • key.
Return to the guidance display by entering the setting value or pressing the [CLR] key.
0: NO
1: YES
Selects whether to execute the malfunction check of the heater.
Execute the malfunction check of the heater: YES
Not execute the malfunction check of the heater: NO
Default: 0 : NO