ISHIDA Uni-3 - 2.3.11 CHANGING FIXED PRICES; 2.3.12 DISCOUNTING UNIT PRICES BY AMOUNT

Chapter 3 BLOCK DIAGRAMS
UNI-3 Service Manual 3-3
3.3 HARNESS LIST
Purposes
①
EU
AC power code for EU
①
USA
AC power code for USA
①
South Africa
AC
power code for South Africa
①
Argentine
AC power code for Argentine
②
Bench/Pole/Elevated
B
ench/Pole/Elevated type inlet assemble
②
Hanging
H
anging type inlet assemble
③
AC power to SMPS
④
DC+24V to main board
⑤
Bench
L2
Bench type customer side display
⑤
Pole -1
L2
Pole type customer side display (main board side)
⑤
Elevated -1
L2
Elevated type customer side display (main board side)
⑤
Pole -2
L2
Pole type customer side display (display side)
⑤
Elevated -2
L2
Elevated type customer side display (display side)
⑤
Hanging
L2
Hanging type customer side display
⑥
Bench/Pole
L2
Bench/Pole type operator side display
⑥
Elevated -1
L2
Elevated type operator side display (main board side)
⑥
Elevated -2
L2
Elevated type customer side display (display side)
⑥
Hanging
L2
Hanging type operator side display
⑦
L2 type backlight resister assemble
⑧
Thermal head
⑨
Stepping motor assemble
⑩
Label sensor assemble
⑪
Bench/Pole/Elevated
B
ench/Pole/Elevated type peel sensor
⑪
Hanging
H
anging type peel sensor
⑫
Bench
L1
Bench type customer side display
⑫
Pole -1
L1
Pole type customer side display (main board side)
⑫
Pole -2
L1
Pole type customer side display (display side)
⑬
L1 type operator side display
⑭
Bench/Pole
B
ench/Pole type key
⑭
Elevated -1
E
levated type key (main board side)
⑭
Elevated -2
E
levated type key (key side)
⑭
Hanging
H
anging type key
⑮
TCP/IP unit
⑯
USB extension cable