CCI.TECU – Operation
Select the speed sensor
Set working position
Activate/deactivate data transfer to the task controller
4.2.1 Select tractor
To select a tractor proceed as follows:
1. On the touchscreen press the button with the name of the current tractor. If the
button with the tractor name is highlighted in white you can press on the scroll
wheel instead.
A list of the stored tractors is opened.
2. Select a tractor from the list. To do so, on the touchscreen press the button
with the tractor name or turn the scroll wheel until the button is highlighted in
white.
3. Confirm your selection by pressing "OK" or pressing the button with the tractor
name again.
4.2.2 Edit the selected tractor
To edit the data of the selected tractor, proceed as follows:
1. Press the "Edit" button (F2) on the touchscreen.
→ A detailed view of the selected tractor is opened.
2. Select all tabs to be modified in the detailed view. To do so, press on the tab
icon on the touchscreen or change using the buttons "To the left" (F8) and "To
the right" (F2) between the tabs.
3. Enter the new value and execute the new setting.
The processing options for the individual tabs can be consulted in chapter
4.3.3.
12
To Next Page
Loading...