VT50 – Operation
5.2.3 Entering Boolean Values
A Boolean value is a value whereby it is only possible to choose between
true/false, on/off, yes/no etc. If a parameter is selected in an operating screen
which has a Boolean value, the corresponding input dialogue appears.
Display for false, off, no:
Display for true, on, yes:
Proceed as follows to enter a Boolean value:
1. From the operating mask select the parameter whose value has to be
changed. Press on the parameter on the touchscreen or turn the scroll wheel
until the parameter is highlighted in white and then press on the scroll wheel.
Once the parameter is highlighted, alternatively you can also press the "OK"
button.
The input dialogue is opened.
2. Enter the new value. Press the square with the black border in the input
field.
Alternatively you can enter the value by turning the scroll wheel.
3. Confirm your input with "OK" or by pressing the scroll wheel.
22
To Next Page
Loading...