VT50 – Operation
Display error memory
5.3.8.1 Display error memory
To display the error memory, proceed as follows:
1. Press on the "Error memory" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A chronologically ordered list of error messages opens.
2. To view detailed information about one of the error messages on the
touchscreen press the button with the sensor or turn the scroll wheel until the
button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A mask opens with the following information about the error message:
• Date and time
• Serial number
• Version number
• Error message text
46
To Next Page
Loading...