VT50 – Operation
5.3.8 Info and Diagnostics
In the menu Info and Diagnostics the function and status of the software and
hardware components of the terminal can be checked. You receive the version
information for installed apps. Basic information about the connected implements
can be called up.
You have the following operating options:
Change to the terminal information
Press the "Terminal" button on the touchscreen.
The Terminal mask opens.
More detailed information about the terminal can be found in chapter
5.3.8.2.
Change to the network member information
Press the "Network members" button on the touchscreen.
The Network members mask opens.
More detailed information about network members can be found in
chapter 5.3.8.3.
Change to the storage information
Press the "Storage" button on the touchscreen.
The Storage mask opens.
More detailed information on storage can be consulted in chapter 0.
Change to self test
Press the "Self test" button on the touchscreen.
The Self test mask opens.
More detailed information on self test can be consulted in chapter
5.3.8.5.
45
To Next Page
Loading...