VT50 – Operation
5.3.8.2.1 Display software information
To display the software information, proceed as follows:
1. Press on the "Software" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A mask opens with the following software information:
• Package
• Anedo Base System
• Bootloader
• Version number ISOBUS UT
• Kernel
• Version number MENU
• Version number of the individual apps
5.3.8.2.2 Display hardware information
To display the hardware information, proceed as follows:
1. Press on the "Hardware" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A mask opens with the following hardware information:
• Terminal type
• Hardware version of the terminal
• Serial number
• Manufacturer ID
• Manufacturer
48
To Next Page
Loading...