DAILY MCA2014 4x4 ‒ BODYBUILDER INSTRUCTIONS
GENERAL INFORMATION
1.8 GUARANTEES
7
– Printed 603.95.994 – 1 Ed. - Base 05/2015
191319
Figure 1
1. IVECO
2. Authorised workshop upon Dealer order
3. Bodybuilder
4. Customer
Based on this Directive, IVECO (main vehicle manufacturer) and a Bodybuilder intending to launch the multi-stage approval process
must sign a specific Collaboration Contract, called Technical Agreement, which sets out the content and reciprocal obligations in
detail.
Consequently:
1. IVECO has the responsibility of providing, in the agreed form, the approval documents (EC/ECE approvals) and the technical
information necessary for the proper implementation of the fitting and/or transformation (manuals, drawings, specifications);
2. the Bodybuilder has the following responsibilities:
■ the design and implementation of modifications to the basic vehicle received from IVECO,
■ reattainment of approvals of systems already approved in a previous stage when, due to changes on the basic vehicle the
approvals need to be updated,
■ compliance with national/international laws and in particular the laws of the destination country, for all changes made,
■ presentation of the changes made to a technical service, for evaluation,
■ appropriate documentation of the changes made, in order to give objective evidence of compliance to the aforemen-
tioned provisions of law (e.g. approval documents/test reports).
Before signing the Technical Agreement IVECO reserves the right to visit the Bodybuilder, in order to verify qualifications to carry
out the fittings and/or processing for which the above collaboration is requested.
The contents of the Technical Agreement can be evaluated in detail upon request to the Manager for relations with the Bodybuilder
for the single Market.
1.8 GUARANTEES
The guarantee that the work has been performed to standard must be given by the Bodybuilder who made the superstructure or
modifications to the chassis, in full compliance with the instructions in these Guidelines.
IVECO reserves the right to void the guarantee on the vehicle, if:
● unauthorised fittings or transformations have been carried out;
● a chassis not suitable for the fitting or intended use has been used;
● the standards, specifications and instructions, provided by IVECO for proper execution of the work, have not been respected;
● original spare parts or components made available by IVECO for specific operations have not been used;
● safety regulations have not been respected;
● the vehicle is used for purposes other than those for which it was designed.
To Next Page
Loading...
Need help?
General
