DAILY MCA2014 4x4 ‒ BODYBUILDER INSTRUCTIONS
APPLICATIONS OF SUPERSTRUCTURES
3.14 SPECIAL OUTFITS
27
– Printed 603.95.994 – 1 Ed. - Base 05/2015
3.14 SPECIAL OUTFITS
The body builder must ensure compliance of operations carried out with legal requirements, especially in the case of configurations
for the transport of persons.
Cowl chassis versions
They are made specifically for the installation of special bodies or equipment (shop vans, motor homes, etc.).
The indications and precautions shown on the technical documentation (chassis diagram) provided by IVECO must be carefully
respected.
Motor home
Mass limits applicable to single axles must be strictly adhered to, as well as the total limit, keeping in mind a sufficient load margin in
addition to the number of people expected:
● baggage, tents, sporting equipment;
● water tank, sanitary facilities;
● gas cylinders, etc.
It is necessary to ensure that the load to be transported can be placed in specific compartments, with appropriate safety margins
and providing suitable directions.
Special attention must be given to the construction of compartments for gas cylinders, which must be built in compliance with spe-
cific regulations in force and adopting the necessary safety precautions.
For repair operations on the rear overhang, see the instructions in Chapter 2.5 .
To Next Page
Loading...
Need help?
General
