Janome JR3300 series - Output Signal (PNP)

External Control (I/O / Fieldbus) 29 DESKTOP ROBOT JR3000
2.11
Output Signal (PNP)
■
When using an external power supply
■
When using an internal power supply (optional)
Caution
Do not assign wiring other than the wiring specified above.
Assigning the wrong wiring can damage the internal circuits.
#sysOut1-
#sysOut16
COM+
(DC 24 V)
＋
－
External
Device
External Power
Supply DC 24 V
＋
－
#sysOut1-
#sysOut16
COM-
(GND)
Internal Power
Supply DC 24 V
External
Device