Janome JR3300 series - I;O2 Cord (Unit)

External Control (I/O / Fieldbus) 98 DESKTOP ROBOT JR3000
8.4
I/O2 Cord (Unit)
■
I/O2 Cord (Unit) (optional)
NOTE:
The part number varies according to the cable length.
Cable Wiring
Pin No.
Insulator
Color
Mark
Color
Number
of Marks
Pin No.
Insulator
Color
Mark
Color
Number
of Marks
1 Blue 14 Green White 1
2 Orange 15 Brown White 1
3 Green 16 Gray White 1
4 Brown 17 Red White 1
5 Gray 18 Black White 1
6 Red 19 Yellow Black 1
7 Black 20 Pink Black 1
8 Yellow 21 Purple White 1
9 Pink 22 White Blue 1
10 Purple 23 Blue Red 2
11 White 24 Orange White 2
12 Blue Red 1 25 Not connected
13 Orange White 1
If you connect an external device to I/O-1, make sure to check the wiring before turning ON the electricity.
Refer to “2.4 Wiring Layout Check (NPN)” or “2.5 Wiring Layout Check (PNP).”
■
Connector (Unit) (I/O2) (optional)
Janome part No.: 961513007
Cable Length
[m]
Janome
Part No.
2 982544013
3 982544312
5 982544415
Connector: DB-25SF-N
(Manufacturer: Japan
Aviation Electronics
Industry)
Junction Shell:
DB-C8-J10-F4-1
(Manufacturer: Japan
Aviation Electronics
Industry)