Jensen VM9424 - Page 21

16
VM9424
Video Sub-menu Features
If the monitor is in display mode, the monitor automatically switches to
CAMERA mode upon reverse driving. When the reverse driving stops, the
monitor return to its original input mode.
Audio Sub-menu Features
Setting Options Function
TV Shape 16 9
4:3
Aux IN Auto The color signal output is switched automatically based on
the current video input signal - NTSC or PAL.
PAL The color signals are output in the standard PAL format.
NTSC The color signals are output in the standard NTSC format.
Brightness 10 to (-10)
Setting Options Function
Bass Freq 60Hz Adjust Bass boost/cut frequency. Range of adjustment is +/-
12 dB.
80Hz
100Hz
120Hz
Middle
Freq
500Hz Adjust Middle boost/cut frequency. Range of adjustment is +/
- 12 dB.
1kHz
1.5kHz
2.5kHz
Treble
Freq
8kHz Adjust Treble boost/cut frequency. Range of adjustment is +/
- 12 dB.
10kHz
12 5kHz
15khz
Subfilter 80Hz Select a crossover frequency to set a cut-off frequency for
the subwoofer's LPF (low-pass filter).
100Hz
120Hz
140Hz
160Hz
Bass Q-
Factor
Wide 1 Adjust the "Q" or width of the bass control of the Bass Freq
selected.
Wide 2
Narrow 1
Narrow 2